Indoor Lighting Without Electricity

Indoor lighting without electricity: when you think of lighting, the normal thing is that you do it in installations, cables coming out everywhere and in economic outlay. But what if we talk about wireless lighting that means lights that don’t need to be plugged in?

Believe it or not, it is the future in many places, and it may be the option non-electric light source you were looking for. Do you want to know more?

How to indoor lighting without electricity

The wireless lighting of the future

You may not have seen it yet, but the truth is that there are offices and houses with wireless lighting, more sustainable and that save a lot on electricity consumption.

It is a technology that uses, in most cases, LED lighting because it allows us to forget about cables and make the home or office safer.

The operation of this wireless lighting is not easy, but it is not complicated either. What is done is to use wireless pushbuttons that, by radio frequency, can command the order for the lamps to turn on.

wireless lamp

The only thing is that right now many of these switches need batteries to work, and they wear out very quickly, so what you save on the one hand, can hurt on the other.

These buttons work in a very simple way since you simply have to press once to emit a pulse and, after that, when you release, you emit another pulse. The two are different so the receiver understands to turn the lights on or off. But that’s not all, it also has the possibility of regulating the intensity if we hold down the switch.

Wireless and efficient lighting

As we have mentioned, there are already buildings that use this type of technology and that benefit from sustainable lighting. And we have an example to give you: the Empire State Building, a building that generates energy savings of more than 65% thanks to the lights it has.

And it is that the building has detectors that make the lights turn on or off depending on whether that area is used or not, wireless components, to improve the remodeling work and not have to do installations that may generate inconveniences, etc. It also has light sensors that regulate the intensity of the light needed at all times in such a way that they regulate its intensity based on the sunlight that enters the building.

Many other buildings are based on this to save on electricity and to be more efficient, so we do not rule out that it is the future in this regard. You may have to wait a little longer to solve the problems, but once done, we will forget about cable installations.

Wireless lamps in your home are already a reality

Although now it is a technology that is giving some failures, it is almost certain that, within a few years, this will change completely. Therefore, we are going to give you some ideas for light without cables something like battery-operated lights. It may not be finished yet and is as functional as it should be, but there are many ways to have a light without the need for cables.

How to light up a room without electricity

Idea 1: Illuminate with cordless lamps

Can you imagine a drawer that you need to light up in the middle of the night? Unless you carry your mobile or a flashlight, it will be quite difficult for you to do so and in the end, you will have to turn on the light. But you can use cordless lamps.

They are small lamps (you have them available in many models and sizes), which stay on or are turned on with remote control and allow you to illuminate a small space (a drawer, a shelf, the part of the worktop that the furniture covers, etc.) .

The advantage of these lamps is that you can fix them in the area where you need them and they spend very little. As you can also turn them on and off whenever you want, and they usually have LEDs, so the light they emit is strong from the beginning, you already have the solution for those areas that are difficult to illuminate.

The disadvantage may be in terms of the battery they carry since sometimes you will have to recharge it or put batteries to work.

Idea 2: Illuminate with led strips

Another way of wireless lighting is through led strips. You can build these strips as long as you want and connect them to a battery that will take care of making them work. While you may think they have cables, these are minimal and you won’t have any difficulties with them.

led stripe

The advantage of led strips is that you can make them as long as you need them, placing them in strategic areas of the home to give that missing point light. In addition, the led strips can also change color.

Idea 3: Illuminate with solar lamps

Our third idea of ​​wireless lamps is solar, those that are charged with sunlight and then emit its brightness until the battery is “used”. They are very practical, especially if you live in an area where the sun shines a lot and can be recharged throughout the day so that you can use them later.

solar lamp

Solar lamps are not easy to find, but thanks to the Internet have a good chance of success. Above all, consider the type of battery it has since the larger it is, the more hours you can use the lamp when there is no sun. The same would happen with solar panels in homes and offices that could take care of general lighting.

Idea 4: Illuminate with people detectors

As you know, people detector systems make the light turn on when it detects movement. And that can keep the light off (and therefore not wasting) until it is needed.

It is ideal for storage areas, little crowded corridors, rooms that you do not enter often, etc. because simply with your movement the lights will turn on.

Although wireless lighting is still not well achieved, you can benefit from it in some aspects to save something on your electricity bill. If you want information about lighting, do not hesitate to contact us, surely we can give you what you need for your lighting.



Leave a Comment