Himalayan Salt Lamp Care Keep it Like The First Day [Updated to 2022]

This is a guide with the actions and steps you must follow to keep your natural salt lamp like the first day.

I am going to give you several tips and I will explain the care that your lamp needs, which I will give you in advance, they are very simple.

My salt lamp melts

It may not feel like it at this point, but it’s a good thing. It’s phenomenal! A salt lamp that sweats is natural and 100% authentic!

Yes, I am serious, that is proof that your lamp is original. Due to their composition, they are hygroscopic, simply put, they absorb humidity from the environment, and therefore they melt.

So is it normal? Yes, it is, but we can prevent it from sweating or crying by following a few simple guidelines and keeping it looking like new for many years.

Salt lamp maintenance

Dry the lamp: At the moment of detecting the first symptoms that the salt stone begins to sweat or melt, we must dry its surface, after disconnecting the power supply, using for this, and always with great care, kitchen paper or a soft cloth. .

Turn on the lamp: Although it seems trivial, when you turn on the lamp, the heat generated by its bulb evaporates the small traces of water that appear, thus preventing it from starting to melt. It is important to note that the bulb must be filament (15W), since LEDs do not generate enough heat.

Choose the best location: As a rule, we should avoid placing the salt lamp, whatever its type, in areas with high humidity, such as the kitchen, bathroom or places where we have the washer or dryer.

Use dehumidifiers: Depending on where we live, high humidity can be common and difficult to avoid, therefore, these useful devices can be useful.

Cover the lamp when not in use: It is a drastic solution, provided that the previous ones are insufficient, but using a cover, this can be a transparent dome, isolates the lamp from the humidity of the environment and consequently, it will not melt.

How to clean a salt lamp

Unfortunately, like all things, rock salt lamps are not exempt from collecting dust and dirt.

For this reason, on a regular basis, we must proceed to remove the dust from its surface, for this we must follow the following recommendations.

Disconnect the power supply: It is the essential rule when handling any element that has electrical voltage. To do this, we must turn it off, and for greater safety, since the surface may be wet, disconnect it from the power outlet.

Clean and dry its surface: We will use a damp cloth, be careful with this, to clean its surface. We will not use abundant water, since this would cause wear on its surface. Once we have finished we will leave it completely dry using kitchen paper.

Reconnect the lamp: After plugging it in we will once again enjoy its pleasant lighting.

By following these simple steps, your salt lamp, whatever type you have selected, will be with you for many years.

Be careful with the salt candle holders!

For practical purposes, the steps to take care of this type of rock salt lamps are the same as for their sisters.

Still, it is important to note that the vast majority of salt crystals lack a protective base, so the rock itself is in contact with the surface on which it is placed.

This is important because they tend to get quite hot and could damage whatever is underneath them . It is advisable to check if your lamp has little separation between the bottom of the glass and the position of the tea light. And if so, consider placing something under it.

What does it mean when the salt lamp sweats

Why does the salt lamp release water?

Do not place salt lamps near sources of steam such as a dishwasher, washing machine, or in the bathroom. Salt can melt with prolonged exposure to high humidity, which is why some lamps may expel water .


What function do salt lamps play?


Salt lamps transmit good energy, according to Feng Shui. They give the environment a touch of pink and soft light that invites relaxation. They improve sleep quality by removing electromagnetic waves from the air.


What happens if I turn off the salt lamp?

There are no contraindications if it is turned off during the day or at night, although, if it is turned off for more days, we recommend covering the rocks with a film or a nylon bag to waterproof the lamp , since the cold salt will continue to absorb the humidity and not being able to dry it due to lack of temperature, the stones

Where should salt lamps be placed?


Your salt lamp can be kept on for as long as you like. These do not have any side effects; instead, they can be beneficial to your well-being. Besides various ways to use your salt lamp , the best position and place is your bedroom and spa.


What is the significance of the salt lamp?


Feng Shui, an ancient philosophy that tries to attract everything positive, elevated salt lamps since the light helps eliminate negative energies, as well as attract vital forces, health or happiness. Thus, salt stones help maintain physical and mental well-being and a good atmosphere in the home.


How do you care for a salt lamp?


To clean your salt lamp, it is best to take a damp cloth and rub it gently. It must be kept clean of dust and since it absorbs the particles, it should be cleaned more from time to time . Use a delicate cloth moistened with lukewarm water but not too soaking wet.


Where to place the salt lamp according to Feng Shui?

According to Feng Shui , they give off good energy. Placing them in the bathroom prevents prosperity from leaving us. They relax by providing the environment with a touch of pink and soft light that invites relaxation. They improve sleep quality by removing electromagnetic waves from the air.


How is a salt lamp used?

Instructions for use: The salt block can be used directly on gas fires, ovens or embers (do not use on induction plates). For use on gas fires, heat 15 minutes on low heat, 15 minutes on medium heat and 10 minutes on maximum heat.

How to care for Himalayan salt lamp?

How to clean a salt lamp ?

  1. Turn off and unplug the salt lamp. Once it cools down you can move on to the next step.
  2. Gently wipe a damp cloth over the stone.
  3. Dry the salt lampwith a cloth (preferably microfiber so that it does not release lint).
  4. Plug the lampinto power and turn it on.

How to know if a salt lamp is fake?

How to tell if a salt lamp is fake

  1. Does not release water. Moisture resistant.
  2. Very durable. As we just said, Himalayan salt lamps are fragile.
  3. Very powerful light.
  4. cheap white glass
  5. There is no mention of Pakistan.
  6. Poor return policy.

Where to locate selenite?

In nature we find it in marine evaporites, in caves where the air is dry enough. When amorphous masses are found, the name it receives is gypsum or its alabaster variety.

How to perfume a salt lamp?

Salt lamps contain a nightstand-type switch, which you must press to turn it on. Once lit, place around 20 drops of AWEN aromatic essence directly on the salt stones . After a few minutes, you can enjoy that aroma that causes well-being throughout your home.

How to know if Himalayan salt is real?


How to know if Himalayan salt is real ? To prove it, you just have to put a little salt in a glass of water and shake, the specialist tells Vix Brasil. It’s very easy: if the water turns pink, it indicates that it is not real Himalayan salt .


How long do salt lamps last?

Well, the answer is very simple, the duration of a salt lamp is eternal, you will have bought it, you will have died and it will still be there… as long as you give it the necessary care and affection, otherwise its life will be cut to a maximum of 5 years depending of humidity.

How to make a lamp that works with water and salt?

The operation of this curious invention is very simple: all you have to do is mix a glass of water with two tablespoons of salt inside the device and the lamp will have eight hours of light. The system works thanks to a galvanic cell battery that uses saline solution as an electrolyte.


What are the benefits of a Himalayan salt lamp?

The main benefit of Himalayan salt lamps is their ability to ionize the air. These stones emit negative ions that bring balance to the environment by sticking to the positive ones emitted by electronic devices, that is, they are capable of absorbing excess electromagnetic waves.

Leave a Comment